Guide · Law & labelling

Supplement packaging for Poland: what to change before the first pallet

Most foreign packs can stay. What changes is the label panel, the paperwork behind the bottle and who in Poland answers for the packaging waste.

Published 4 November 2026Reading time 11 minAuthor

Short answer

Supplement packaging for Poland has to do four jobs: hold a Polish label that is legible at the legal minimum font size, come with a food contact declaration from the packaging supplier, sit inside a Polish extended producer responsibility (EPR) set-up with BDO registration, and be ready for the EU Packaging and Packaging Waste Regulation, which has applied since 12 August 2026. Check the label space first, because it is the change that most often forces a new pack. Then decide who in Poland is the entity placing packaged products on the market, because that entity registers in BDO and finances recycling.

Supplement packaging formats for the Polish shelf and for e-commerce

Start with where the product will sell. A pack that works on a pharmacy shelf can fail in a courier parcel, and a pouch that ships well can look lost on a drugstore shelf. We look at three things per format: how much flat surface there is for the Polish text, how the pack survives transport, and what the packaging is made of, because that decides the recycling route and the EPR reporting line.

FormatWhere it worksWhat to check for Poland
Plastic bottle or jar with capPharmacy, drugstore, own store, marketplacesLabel wrap height vs. Polish text length; tamper seal; material declared for recycling
Glass jarPremium positioning, own storeBreakage in courier parcels; weight in shipping cost; glass as a separate EPR material line
Stand-up pouchE-commerce, subscriptionsMulti-layer laminates are harder to recycle; check against the PPWR recyclability rules due from 2030
Blister in a cartonPharmacy shelfCarton gives the most label space; two materials to report
Sachets or stick packs in a boxPowders, sports, travel packsVery small units may use the reduced label set; the outer box carries the full Polish label
Tube for effervescent tabletsDrugstore, pharmacyNarrow surface; often the hardest format to fit a full Polish label on

Do not redesign the pack for Poland unless the label cannot fit. A new mould or a new print run costs more than a well planned label, and your stock in other markets stays usable.

Food contact paperwork behind the bottle

A capsule bottle is a food contact material. Regulation (EC) No 1935/2004, Article 1(2) covers materials and articles that "are intended to be brought into contact with food". Article 3(1) requires them to be made under good manufacturing practice so that they do not transfer constituents to food in quantities which could "endanger human health", change the composition of the food unacceptably or spoil its taste and smell.

For materials covered by specific measures, such as plastics, Article 16(1) requires "a written declaration stating that they comply with the rules applicable to them". Ask your packaging supplier for that declaration for every bottle, cap, liner and pouch. Keep it in the product file next to the specification, because a Polish distributor or a retail buyer will ask for it, and so can an inspector.

If you switch packaging suppliers for Poland, the declaration has to be redone for the new component. That is a common gap when a brand moves filling to a Polish contract manufacturer and the manufacturer sources its own bottles.

Supplement label design: plan the space for Polish text

The list of what must appear on a Polish supplement label is in our guide to supplement label requirements in Poland. Here the question is narrower: will it fit?

Regulation (EU) No 1169/2011, Article 13(2) sets the minimum size of mandatory particulars: the x-height must be "equal to or greater than 1,2 mm". Under Article 13(3), on packs whose largest surface is under 80 cm2 the minimum drops to 0.9 mm. Article 15(1) requires mandatory information in "a language easily understood by the consumers" of the Member State where the food is marketed, which in Poland means Polish.

Polish text usually runs longer than the English original. Measure the label panel, not the bottle, and test the real Polish copy at the legal x-height before you approve artwork.

Worked example with assumed numbers

Assume a 60-capsule bottle with a wrap label 140 mm wide and 50 mm high. That is 70 cm2, under the 80 cm2 threshold, so the 0.9 mm x-height minimum applies. Take off about 45 mm of width for the front panel with the brand, product name and quantity. That leaves 95 mm by 50 mm, roughly 47 cm2, for the Polish mandatory text, the nutrition table for the daily portion, warnings and the business operator details. If your English back panel is already full, the Polish version will not fit at the same size.

The options, in the order we try them:

  1. Shorten the marketing text on the back panel and keep the mandatory text.
  2. Move to a taller label on the same bottle, if the bottle shoulder allows it.
  3. Add an outer carton, which gives four large panels.
  4. Use a peel-off or booklet label for multi-language markets.
  5. Only then change the bottle size.

If you already have stock printed in another language, read our guide to relabelling supplements for Poland before you print new packs. A Polish sticker over a foreign label is a legal route when done correctly.

EPR packaging Poland: who pays for the packaging waste

Poland runs extended producer responsibility for packaging under the Act on packaging and packaging waste management. The consolidated text is Dz.U. 2026 poz. 619, announced on 30 April 2026.

The act names the entity that carries the duty: the entrepreneur placing products in packaging on the market (Article 8 point 23, "wprowadzający produkty w opakowaniach"). Article 17(1) says this entity "jest obowiązany zapewniać recykling odpadów opakowaniowych" - it must ensure recycling of packaging waste of the same type as the packaging in which it placed products on the market. Under Article 17(2) it can do this itself or through a packaging recovery organisation. Article 17(6) ties the duty to a product fee in defined cases, so read it with your recovery organisation.

In practice most brands sign with a recovery organisation, report the weight of packaging by material, and pay a fee for the recycling the organisation arranges. To do that, you need weights per component: bottle, cap, label, carton, leaflet, shipping box and filler. Ask your packaging supplier for them now, before the first report is due.

Your set-up in PolandWho is likely the entity placing packaged products on the marketCheck with
Polish distributor buys and imports your finished goodsUsually the distributorDistribution agreement and the distributor's own BDO entry
Polish contract manufacturer fills and packs for your Polish companyUsually your Polish companyYour recovery organisation
Your foreign company sells from abroad straight to Polish consumersDepends on the PPWR producer rules and authorised representative rulesBDO guidance and a Polish environmental lawyer
Polish fulfilment partner packs your orders into its boxesTo be confirmed per contract - who owns the shipping packagingYour recovery organisation

The last two rows raise the most questions. Treat them as "to be confirmed" for your own structure and get a written answer before launch.

BDO registration: the register behind Polish EPR

BDO is the Polish database on products, packaging and waste management ("Baza danych o produktach i opakowaniach oraz o gospodarce odpadami"). Article 10(1) of the packaging act says entrepreneurs placing packaging or products in packaging on the market "podlega, w zakresie tej działalności, wpisowi do rejestru" - they are subject to entry in the register under Article 49 of the Waste Act. That register is BDO.

Registration gives the entity a BDO number. Polish buyers may ask for it during supplier onboarding, so have it before the first purchase order.

Foreign producers can work through an authorised representative for EPR. A BDO notice of 28 October 2026 lists entities entered in the BDO register as authorised representatives for EPR in packaging, acting for foreign producers, and names Article 45(3) of Regulation (EU) 2025/40 as the basis. The list is stated as current at 26 October 2026.

One point is still moving. The European Commission packaging page says that in December 2025 the Commission proposed suspending the obligation for producers to appoint an authorised representative when selling directly to consumers in other Member States, and that the proposal is still with Parliament and the Council. If you sell direct from abroad, check the status on the day you launch.

  1. Decide who places the packaged product on the Polish market. Write it into the distribution or fulfilment contract.
  2. Register that entity in BDO. Or appoint an authorised representative if the foreign company is the producer.
  3. Sign with a packaging recovery organisation. Or plan to meet the recycling duty yourself.
  4. Collect packaging weights by material. Per SKU, including shipping packaging if you own it.
  5. Diary the annual report. The annual report sits in the Waste Act (Article 73(1)); confirm the deadline for your first year with your recovery organisation.

PPWR key dates for supplement packaging

Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) replaces the 1994 Packaging Directive. According to the European Commission, it has been in force since 11 February 2025 and its application date is 12 August 2026. The Directive is generally repealed on that date, with some provisions still applying afterwards.

DateWhat it means for a supplement packSource
11 February 2025PPWR in forceEuropean Commission
12 August 2026PPWR applies; the 1994 Directive is generally repealedEuropean Commission
12 August 2028Commission Decision 97/129/EC on material identification is repealedReg. (EU) 2025/40, recital 74
1 January 2030Packaging must meet the recyclability design criteriaReg. (EU) 2025/40, recital 28
1 January 2038Packaging must be at least grade B for recyclability to be placed on the marketReg. (EU) 2025/40, recital 28
Harmonised sorting labelStart date depends on a Commission implementing act - to be confirmedTo be confirmed

For a supplement brand the 2030 recyclability line matters most. A multi-layer pouch or a bottle with a sleeve label in a different plastic may need a redesign before then. Start the conversation with your packaging supplier now, because tooling changes take time and you want one redesign, not two.

For e-commerce, recital 84 states that for grouped, transport and e-commerce packaging "the empty space ratio should not exceed 50 %". If you ship one bottle in a box sized for three, fix the box range. Read the operative article and the Commission guidance for the exact rule and exemptions before you change cartons.

Packaging requirements Poland for courier parcels

If you ship to parcel lockers, remember that lockers have fixed compartment sizes. Check your shipping box against the smallest compartment your courier uses. A box that does not fit the small compartment pushes the parcel into a more expensive size band.

Design the shipping pack around three tests:

  • Drop and crush: a bottle with a loose cap or a glass jar without an insert will break in some share of parcels. Test with your real courier before launch.
  • Empty space: size the box to the product range, keeping in mind the 50% empty space principle in the PPWR.
  • Material: paper filler and a single-material box are easier to report and recycle than mixed fillers.

If a Polish fulfilment partner packs your orders, agree in writing who owns the shipping packaging and who reports it. See our overview of the supplement supply chain in Poland for how warehouse and fulfilment fit in.

Supplement packaging checklist before launch in Poland

  1. Measure every label panel. Test real Polish copy at 1.2 mm x-height, or 0.9 mm if the largest surface is under 80 cm2.
  2. Collect food contact declarations. One per component that touches the product: bottle, cap, liner, pouch.
  3. Name the entity placing packaged products on the market in Poland. Put it in the contract.
  4. Register in BDO or appoint an authorised representative. Get the BDO number before onboarding with buyers.
  5. Sign with a recovery organisation. Report weights by material per SKU.
  6. Check 2030 recyclability. Flag multi-layer pouches, sleeves and mixed-material caps to your packaging supplier.
  7. Size shipping boxes. Fit parcel lockers and keep empty space low.
  8. Align the label with the GIS file. The label you notify must be the label on the pack. See our guide to the GIS notification.

The food business operator named on the label answers for the label; the BDO entity answers for the packaging waste. They can be different companies, and both need to know it.

Sources

Primary legal texts and official pages used in this guide. Always read the consolidated version in force on the day you act.

  1. Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) - EUR-Lex
  2. European Commission - Packaging waste (PPWR dates and implementation)
  3. Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food - EUR-Lex
  4. Regulation (EU) No 1169/2011 on the provision of food information to consumers - EUR-Lex
  5. Ustawa o gospodarce opakowaniami i odpadami opakowaniowymi, tekst jednolity Dz.U. 2026 poz. 619 - ELI
  6. BDO - Baza danych o produktach i opakowaniach oraz o gospodarce odpadami
  7. BDO - notice on authorised representatives for EPR (28 October 2026)

This is not legal advice. Packaging and EPR duties depend on your structure in Poland; confirm them with a Polish environmental lawyer or your recovery organisation.

Frequently asked questions

Do I need new supplement packaging to sell in Poland?
Usually not. Most brands keep the bottle or pouch and change the label, or add a Polish sticker or outer carton if the label panel is too small.
What is BDO registration?
BDO is the Polish register for products, packaging and waste management. The entity placing packaged products on the Polish market must be entered in it, under Article 10(1) of the packaging act.
How does EPR packaging work in Poland?
The entity placing products in packaging on the market must ensure recycling of the same type of packaging waste, itself or through a packaging recovery organisation, and report weights by material.
Does PPWR apply to food supplement packaging?
Yes. Regulation (EU) 2025/40 covers packaging in general, including supplement bottles, pouches and shipping boxes. It has applied since 12 August 2026.
What font size is required for supplement label design?
Under Regulation (EU) No 1169/2011 the x-height of mandatory text must be at least 1.2 mm, or 0.9 mm on packs whose largest surface is under 80 cm2.
Can a foreign brand handle Polish packaging obligations without a Polish company?
A foreign producer can work through an authorised representative for EPR entered in BDO. Check the current EU rules on direct sales on the day you launch, as a change was proposed in December 2025.

Read next

Checklist · Law & labellingFood supplement label requirements in Poland - checklistThe label is where a foreign brand first meets Polish regulations - and where it most often trips up. Below is the full list of what it must contain.Analysis · Supply chainRelabelling supplements in Poland - when it pays offEvery foreign supplement sold in Poland needs a complete Polish label. The question is where that label goes on: at your factory, on a sticker in a Polish warehouse, or on new packaging. Each route has a different cost profile and a different risk.Analysis · Supply chainThe supply chain for a foreign supplement brand in PolandThe best entry strategy will not work if the product gets stuck between the factory and the customer. These are the links that need to be in place before your first campaign goes live.

US brand, EU plan? Start with the formula, not the sticker.

Send us your US label and formula. We will show you what has to change for the EU and for Poland before you commit stock.

Contact us